R6 AIS/VDES

R6 AIS/VDES

7001 000-830

The R6 Supreme system is the new generation of shipborne Class-A Transponder system that represents the pinnacle of innovation in the field of AIS and VDES technology.

Easy to use

The R6 Supreme is intuitive and easy to operate and designed to be a tool for the daily work. It is equipped with an all-new Control and Display Unit (CDU), featuring a speedy modern graphical user interface (GUI) in a brilliant, sunlight readable 7-inch touch display with accurate colours at any viewing angle. The display has a resolution of 1024x600 pixels in more than 16M colours.The CDU has interface for central bridge equipment dimming. All information is easy to access through a GUI that reminds of a modern smartphone.

Sensitivity

The R6 Supreme is equipped with a state-of-the-art Software Defined Radio that provides a “Best-In-Class” sensitivity that exceeds the international standards and provides an enhancement in terms of signal reception and range.

Dual use
The R6 Supreme can be integrated with a SAAB type approved Navigation GNSS receiver, and share the Control and Display Unit (CDU) to minimize the number of screens on the bridge and lower the cost for equipment and installation.

Future proof

In a truly innovative design, Saab has once again created a class leading AIS unit that goes well beyond any system previously on the market. The R6 Supreme meets the Class-A AIS radio requirements with ease, and also implements advanced waveforms and communication protocols as defined by the VHF Digital Exchange System standards (VDES). The R6 Radio is capable of handling 64 parallel receive or transmit processes allowing for reception and operation of AIS, ASM, VDE-Terrestrial, VDE-Satellite, AMRD, DSC and Secure AIS over all channels, in parallel regardless of bandwidth or if they are on the lower or upper band. The R6 Supreme incorporates also the new Bridge Alarm Management (BAM) standard as well as dual LAN interfaces (IEC 61162-450) for efficient network integration into bridge systems.

Easy installation

The R6 Supreme AIS/VDES system can easily be integrated with other on-board systems such as ECDIS, radar or other display solutions
using traditional NMEA serial communication or network interface. Dual network interfaces in both the transponder and CDU makes it simple to install on redundant bridge networks.The R6 Supreme offers same VHF and GPS antenna interfaces as with the majority of other AIS equipment, which simplifies re-use of cabling when upgrading.

Features

• Best-in-Class with increased sensitivity (better than -118 dBm) and resilience to interference
• Meets SOLAS V Carriage requirements for AIS
• Designed to meet new advanced communication modes, as defined by ITU-R M.2092-1 for VDES
• Future World-Wide connectivity over VDES-Satellite data links
• Meets IEC standard for cyber security of navigation and radio communication systems
• Dual IEC 61162-450 network interfaces
• Built-in multi GNSS receiver
• CDU with waterproof front for exposed panel mount installations
• Versatile installation options

  • Dimensions/Weight
    R6 Supreme transponder 250x180x50 mm / 2000g / R6 Junction Box 250x180x50 mm / 900g / R6 Supreme CDU 220x125x45 mm / 1500g
  • Interfaces
    IEC 61162-1/2 | 4 Sensor/LR input/output, 3 ECDIS/ARPA/Pilot plug LAN | 2 IEC 61162-450 Eth. RJ45
  • Radio Module
    VHF Transmitter | 1 W – 12.5 W Channel Bandwidth | 25, 50, 100, 150 kHz Receiver Sensitivity | Better than -118 dBm (AIS) Number of Rx processes | Up to 64 parallel Frequencies | 156.025 – 162.025 MHz
  • Power input
    Input voltage | 12-24 VDC Nominal
  • Power consumption
    R6 Supreme transponder 15 Watts | R6 Supreme CDU 5 Watts
  • Bridge alert mgmt
    IEC 62923-1/-2
  • SAAB-R6 Supreme AIS/VDES - Datasheet İndir
R6 AIS/VDES
SAAB

R6 AIS/VDES

7001 000-830